Use HandlePod for Hand-Supported Long Exposures

Using your hand to stabilize a camera against any solid support is a time honored practice recommended by many photo instructors and books. But a camera will not connect solidly to objects and this method is not advisable for long exposures. HandlePod firmly engages any support object and can be hand held against the support for any length of time. It is the only camera support specifically designed to held by hand against support objects. It opens up a whole world of possibility for camera stabilization on literally anything.

HandlePod Makes Any Length Exposure Possible

Moonlight 4 min exposure

Four minute moonlight exposure. HandlePod was held against a fence post.

How long an exposure? How long do you want to hold the HandlePod in place against the support? This photo was taken by moonlight for an incredible four minutes at f6.3 and ISO 500. The HandlePod was held by hand against a fence post. The camera was set on bulb and the exposure measured with a timer. The photo is straight out of the camera without processing. It shows no hint of camera shake. This four-minute exposure demonstrates what can be done with the hand supported camera stabilization that HandlePod provides.

Related Post

Build a DIY Steadicam with HandlePod and $6 for Pa... There are dozens of DIY steadicam designs out there that can be built for a few dollars to thirty or more. Why use HandlePod as part of a steadicam yo...
HandlePod Would Have Helped This 1979 Moonbow Phot... Moonbow on Lower Yosemite Falls shot in 1979 on Kodachrome 64. Serendipity is a concept that often applies to photography. There are times when yo...
Tripod Alternative for Digital Camera Stabilizatio... In the 1800s cameras had to be tripod mounted. In the first few decades from the beginning of photography, cameras had to be tripod mounted and st...
Photo Accessories for Traveling Light The previous blog discussed types of cameras available and their weight considerations. One option not covered was using a smartphone for travel photo...
Add a Gimbal to the HandlePod Steadicam Add a gimbal to the HandlePod steadicam with Traxxas #5151 shafts and U-joint. In a previous blog we described how to build a steadicam device for...

One thought on “Use HandlePod for Hand-Supported Long Exposures

  1. Hermelinda

    You actually make it appear so easy along with your presentation however I to find this matter to be really
    something which I feel I might never understand. It kind of feels too complicated and very large for me.
    I am looking ahead on your next put up, I’ll
    attempt to get the hang of it!

Leave a Reply

Your email address will not be published. Required fields are marked *